Shop

AUTOMATION

Uncategorised

PACKAGING

MARKING

OLI vibratory equipment

Gallery

Industrial

Gallery

Video

Pizzato limit switches

Gallery

Video

Low voltage network distribution components

Gallery

Low voltage components for equipment control

Gallery

Pizzato security door position sensors

Gallery

Pizzato security door hinges, locks and handles

Gallery

Pizzato security chain modules and ropes

Gallery

Westcar hydraulic couplings

Gallery

Comintec overload couplings

Gallery

Rexnord couplings

Gallery

Transportation chains

Gallery

Transportation belts

Gallery

Conveyor corner tracks

Gallery

Conveyor sprockets

Gallery

Conveyor bearings

Gallery

Gravity-driven rollers

Gallery

Motorised conveyor rollers

Gallery

Planetary

Gallery

Conveyor power supply sources

Gallery

Angular and bevel gear units

We offer angular gearboxes, screw jacks and screws by leading and highly experienced manufacturers of reducers.

Need a consultation?

Write or call us now.

Gallery

Shaft-mounted gear reducers

We offer pendular-gear speed reducers by a leading and highly experienced manufacturer of reducers .

We adjust products according to your activities and requirements in order to ensure that you achieve the required output.

For more information, see the Catalogue of reducers.

Gallery

Complete conveyor units

Gallery

Mini series reducers

Gallery

Conveyor pallet systems

Gallery

Conveyor sections

Gallery

Sorting conveyor systems

Gallery

Variators

Gallery

Video

Parallel shafts

Gallery

Video

Bevel

Gallery

Video

Low-centre electric motors

We offer low-centre electric motors by leading and highly experienced manufacturers of electric motors.

We offer a wide range of standard low-centre electric motors:

size range from 48 to 112;
power from 0.37 kW to 50 kW;
rotation speed (number of poles) 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles); we can also offer low-centre motors with the rotation speed of up to 24,000 rpm;
protection rating IP55 or higher;
aluminium or cast iron housing;
insulation class F.
single-phase or three-phase, also motors with AC or DC brakes are available.

Gallery

Helical

Gallery

Video

Worm

Gallery

Video

Micro series vibratory motors

Gallery

Drum motors

We offer electric drum motors by leading and highly experienced manufacturers of electric motors Interroll and Himmel. These are solutions for food industry, airports, malls, logistics warehouses, etc.

We offer a wide range of standard electric drum motors:

size range from 60 to 800;
power from 0.03 kW to 132 kW;
belt speed from 0.05 m/s to 4.5 m/s;
protection rating IP66;
stainless steel housing.

Gallery

Italvibras vibratory motors

Gallery

Sensors

We offer inductive, photoelectric, capacitive and ultrasonic sensors, temperature controllers, cameras, safety light curtains, and encoders by leading and highly experienced sensor manufacturers and.

For more useful information, see:

Gallery

DC motors

Gallery

Three-phase asynchronous motors

Gallery

Frequency inverters

We offer industrial frequency inverters and specialised solar, wind and hydro energy inverters by leading and highly experienced manufacturers of frequency inverters Siemens and .

Technical characteristics of frequency inverters:

power range from 0.12 kW to 3000 kW;
supply voltage from 200 V to 690 V;
grid frequency from 50 to 60 Hz;
protection rating IP00, IP20, IP54;
entirely digital.

Gallery

Nichrome wire and strip

We offer nichrome wire and strip by a leading and highly experienced nichrome manufacturer.

Nichrome characteristics:

operating temperature of up to 1400°C;
nichrome wire diameter from 0.1 mm to 12 mm;
nichrome strip thickness from 0.1 mm to 0.8 mm and width from 0.1 mm to 10 mm.

Gallery

PLC controllers

We maintain a successful cooperation with company and supply PLC controllers. We offer LOGO! modules, Sinamics controllers S7-300, S7-400, S7-1200, S7-1500, HMI touch panels, and software.

Our automation specialists provide a wide range of services:

selection of the most suitable product;
design of automation systems;
assembly of automation cabinets;
programming of controllers;
equipment tuning and start-up;
consultations in the event of breakdown.

Gallery

Precision gears

Gallery

Industrial Detas LED signal lamps

We offer industrial and transport beacons by a leading and highly experienced beacon manufacturer.

For more useful information, see the Bacons catalogue.

Gallery

Silicone rubber and extrusions

We offer heat-resistant silicone rubber and extrusions by a leading and highly experienced silicone rubber manufacturer.

Characteristics of silicone rubber:

temperature from -60°C to +300°C;
solid silicone, hardness from 50 to 80 Sh;
sponge silicone, hardness from 10 to 30 Sh;
wide range of thickness and extrusions;
suitable for food industry.

Gallery

PTFE fabrics and curtains

We offer heat-resistant PTFE and PTFE products by a leading and highly experienced PTFE manufacturer.

PTFE characteristics:

temperature from -80°C to +260°C;
self-adhesive or non self-adhesive;
thickness from 0.08 mm to 0.53 mm;
wide range of widths;
extremely resistant to chemical exposure, resistant to mechanical impact, well-sliding, flexible, electricity insulator, easy cleaning, non-toxic.

Gallery

Flender couplings

We offer couplings by leading and highly experienced coupling manufacturers Rexnord, Flender, Westcar, Rathi and Comintec.

Gallery

Glue labelling equipment

We represent one of the largest manufacturers of labelling equipment in the world. The company boasts long-standing experience in the manufacturing of labelling equipment of various automation levels.

We offer various types of labelling equipment:

banderol application,
cold glue labelling,
hot glue labelling,
self-adhesive label application,
combined labelling equipment.

Gallery

Thermal transfer printers

Thermal transfer printers X40 and X60 have been created for the fussiest customers. Printer characteristics:

printing speed from 600 to 1000 mm/s,
high resolution of 300 dpi,
saving of up to 20% of printer ribbons,
option to choose print heads of various widths.

Gallery

Thermal wax printers

New generation 5800 printers are produced using the Touch Dry Hot Melt technology. These printers can be used for large-scale and high resolution print. The print does not wear away or wash off and is environmentally friendly. Printer characteristics:

HotMelt ink is used for printing on different surfaces,
printing speed of up to 182 m/min.,
convenient and easy to use touchscreen,
may be connected to ERP systems.

Gallery

Laser printers

Laser printers SLC150 and SLC350 guarantee stable production without the use of any maintenance materials. Modern engineering solutions allow these printers to operate at high speeds and increase your production efficiency. The main features of printers:

100,000+ marked products per hour,
installation of print head in up to 10 minutes,
7-inch control touchscreen,
laser head complies with IP55 standard,
laser can operate at a temperature of up to 45°C (113°F),
printing on glass, plastics, paper.

Gallery

Antibacterial labels

Gallery

Water soluble labels

Gallery

Video

Mesh bag labels

Gallery

Paper flow-pack packaging

Gallery

Full-body shrink sleeve

Shrink sleeves are a unique measure for strengthening your brand. Shrink sleeves are scratch-resistant since the print is located on the inner side of the film. Therefore, there is a very slim possibility of damage to the label. It is a great choice for advertising campaigns since as much as 360° of bottle area can be used for any additional information and design solutions.

Gallery

Video

BIXOLON printers

With their practical design, Bixolon printers by this South Korean manufacturer are easy to use.

We recommend using those printers in a clean office environment, on a desk, in a room temperature. The useful life of such printer is at least 3 years.

Gallery

Top lidding packages

This type of packaging is produced by sealing the top film on the container. Packages may be tightly sealed, easily removed or re-sealable. Different materials are used for different purposes, e.g. PP, PE, PA, PET, cardboard, aluminium, etc. Films can be transparent, white, metallised, withstanding pasteurisation or sterilisation.

Gallery

Flow-pack packaging

Products are packaged by forming one longitudinal and two transverse welds. To do this, we use horizontal and vertical packaging equipment. Packages are used in food, household chemical products, cosmetics, medicine and many other industries.

Gallery

Sachets

These are pouch-type packages. They are shaped by sealing on three or four sides. Packages of this type are widely used for grocery products, cosmetics, frozen or dried food products.

Gallery

Wrap packaging

Wrap packaging is commonly used in dairy industry to package fatty products, such as butter or margarine. Due to high moisture content, such products are highly-susceptible to mould. Product taste and flavour is easily impacted due to absorption of surrounding odours. When affected by light, heat and UV rays, products may easily switch to liquid form.

Gallery

Four-colour printers

These digital inkjet printing devices are used to print coloured labels both on adhesive and non-adhesive materials in continuous rolls.

Gallery

Wrap-around labels

Wrap-around labels are produced from polypropylene and mostly used for the labelling of PET beverage bottles. Labels of this type enable obtaining better design effects, as well as higher gloss and printing quality.

Gallery

Video

Coloured self-adhesive labels

We print coloured self-adhesive labels in rolls by means of flexographic printing (up to 9 colours). We may offer one of the widest ranges of self-adhesive labels:

various forms,
various materials,
made from standard or eco-friendly materials.

Gallery

Video

Small quantities of labels

Fast label printing = Digital label printing If our customers need a small amount of coloured self-adhesive labels (up to 5,000+), we offer digital printing. What are the advantages?

Recognised quality

Our digitally printed labels are distinguished by high quality. For example, even very small (1 mm) letters and other elements are printed in high resolution and are well readable.

Variable information

Each label may contain different information: number, barcode, QR code, etc.

Gallery

Video

DPG labels

We are one of the limited number of companies in the European Union to obtain the right to print labels with the DPG deposit mark for the German beverage market. In order to ensure the security of DPG mark, we are obligated to use special technologies and adhere to strict requirements. As a DPG certified company, Pakmarkas has the right to buy DPG paints from DPG paint manufacturers and use the device for testing the deposit mark printing quality.

Gallery

Shrink sleeve for conical cups

A simple self-adhesive label cannot be evenly affixed to a conventional cone shaped container. Therefore, we have developed a technology that enables covering the inner surface of a label with a special glue so that the label would not slip off the container.

Gallery

Video

CARL VALENTIN printers

CARL VALENTIN is a Germany-based company with more than 100 years of history and the global leader in thermotransfer printing.

The manufacturer recommends using those printers in a clean office environment, on a desk, in a room temperature. The useful life of such printer is at least 3 years.

Gallery

CAB printers

Sticker printers by a German manufacturer CAB are distinguished by their compact size; most of their parts are produced from plastic but they boast a robust housing and a reliable operation mechanism. These fast printers are comprehensive and easy to control.

Gallery

CAB and CARL VALENTIN printers

Printers produced by CAB and CARL VALENTIN can be used with large ink ribbons and blank self-adhesive label rolls.

These printers can be used both in the office and manufacturing premises. The useful life is at least 5 years.

Gallery

Thermal packaging

There are two types of heat shrink polyolefin (POF) film: half-sleeve or band. Half-sleeve film is intended for forming closed packages when packing single products and their groups. Band-type film is used for forming closed or partly-closed packages.

Gallery

Wash-off labels

Wash-off labels are transparent sticky labels that may be attached to any deposit return glass bottles (beer, soft drinks, etc.).

Gallery

Video

For large quantities of labels

These label printing devices are one of the most reliable on the market and can be used 24/7 for an entire week. Printers have the estimated useful life of at least 5 years until a critical failure.

Gallery

Bandall labels

As opposed to banding self-adhesive labels, these bandall labels are not affixed to the product using adhesive, but are wrapped around it tightly and thermally fused at a precise place. Such labelling is suitable for manufacturers who are looking for cost-efficient non-standard solutions.

Gallery

For fast and convenient printing

Universal sticker printers are very easy and convenient to control. The useful life of these printers is at least 5 years.

Gallery

Monochrome labels

We also offer monochrome labels printed by means of thermal transfer. This is a quick and cost-efficient solution for those who require small quantities of stickers of various types.

Gallery

Blank self-adhesive labels

Wide range of blank labels Blank self-adhesive labels are produced for label printers or scales with built-in printers. We offer blank labels of various forms and colours, made of paper or film. We also can produce unique blank labels specifically for your product: choose individualised materials, sizes, rolls, adhesive qualities, and colours.

Gallery

Ink ribbons

We offer a wide range of ink ribbons with various characteristics suitable for most thermal transfer printers. We have tried majority of the most popular ink ribbons by all the largest manufacturers and made a thorough selection of the best types of them. We never replace them with substitute products. Therefore, we can guarantee that you will always receive only high-quality materials.

Gallery

Double-layer labels

4 times more information Double-layer peel-off labels is an ideal solution for packages with a relatively small area which must contain multiple-language versions, product composition and other mandatory information.

Gallery

Video

Glowing labels

Gallery

Video

Replay 55 chamber packaging machine

Gallery

Automatic pallet wrapping machine

Gallery

Industrial palletizing robots

Gallery

Industrial pick and place robots

Gallery

Industrial painting robots

Gallery

Industrial welding robots

Gallery

Industrial collaborative robots

Gallery

Vertical packing machines

Machines for vertical packing are used for packing various loose, granular, powdered products into bags. These machines can have weight-type, volume-type or helical batcher depending on the product to be packed.

Gallery

Palletising equipment

Frame palletising machine automatically distributes products into groups and loads them on a prepared pallet layer by layer. The machine allows for full automation of hard physical labour – the process of loading boxes or bags on a pallet.

Gallery

Depalletising equipment

Semi-automatic depalletising equipment offered by us will help you to conveniently transfer a layer of bottles from a pallet on a multi-line conveyor. Machines can be adapted for operation with various types and sizes of bottles.

Gallery

Fruit and vegetable weighting and packing equipment

These machines are used for packing all types of fruits and vegetables in mesh bags and marking them. In the course of weighing and packing, the product is protected from damage. Package weights can vary from 0.5 kg to 10 kg.

Gallery

Equipment for packing into Big-Bags

These machines allow weighting and packing products into Big-Bags having two or four lifting loops, capable to withstand the weight of up to 1,500 kg. The product weighting system is suitable for packing various materials, both granulated and powdered. Depending on the product type, it is possible to reach output of up to 15–20 bags per hour.

Gallery

Equipment for packing into open bags

These machines are used for packing loose and granulated products into paper, plastic, polypropylene and other types of bags. Weighting can be either:

gross – the machine is filling the product into a bag and weighting simultaneously;
net – at first, the product is weighted and then filled into a bag.

Gallery

Equipment for packing into valved bags

These machines are intended for packing loose and granulated products into valved bags. Weighting can be either:

gross – the machine is filling the product into a bag and weighting simultaneously;
net – at first, the product is weighted and then filled into a bag.

Gallery

Printer and applicator in one

We are pleased to present 2200 Series and 2200 Pallet printers that make complicated label printing and application solutions very simple.

For more useful information, see:

Gallery

Inkjet printers

Inkjet marking machines are designed with a view to ensure that the printing process is smooth, simple and fast. The main characteristics of printers:

printing of up to 5 lines simultaneously,
printing speed from 4.4 to 6.6 m/s,
automatic washing system,
most printers comply with IP56 and IP66 protection rating,
convenient and easy to use touchscreen.

Gallery

Mark & Read system

Advanced text recognition system Mark & Read will allow you to save time and costs by recognising low-quality print on a product. The system, operating with a camera, checks the package batch number, time and use-by date just in several fractions of a second. If any required text is missing, incomplete or illegible, the system rejects the product automatically.

Gallery

Filling equipment

Types of filling equipment:

gravitational and/or low-vacuum level filling machines are used for bottling non-carbonated and thin liquid products: natural water, alcoholic drinks, clear fruit juices, vinegar, milk, chemical products, etc.;
high-vacuum level machines are used to bottle thick and viscous products (vegetable oils, syrups, etc.) into rigid containers;
volume-based filling machines bottle the precise amount of product with the tolerance of ±1.5 cm³ for 1-litre bottle, irrespective of density of the bottled product and the volume of bottles of that same type;

Gallery

Product preparation equipment

Pasteurizers
Pasteurizing is a process where the product is heated up to the defined temperature and kept at this temperature for specific time. The purpose of pasteurizing is to protect the product against micro-organisms and thus, extend its use time. This product processing method is often used in beer industry. The pasteurizing level is defined by pasteurizing units PU. One PU means that the product is heated up to 60°C and kept at this temperature for one minute. For example, beer is pasteurized up to 22–25 PUs.

Gallery

Bottle flushing/washing machines

Flushing machines are used to remove mechanical impurities from new bottles occurring during the bottle transportation, and to reduce biological contamination which is dangerous to both product and human health.

Gallery

Corking equipment

Automated corking machines can have a single head or many heads. Machines are easily adjusted for corks/caps of required type (you will only need to perform several simple operations).

Gallery

Moisture blow-off equipment

Gallery

Shrink sleeve application equipment

Gallery

Stretch film wrapping equipment

These machines are used to wrap products loaded onto the pallets with Stretch film. This way, products are fixed and protected against humidity and dust.

Gallery

Inspection equipment for bottles and packing lines

We represent one of the largest manufacturers of quality control equipment in the world.

We offer and install standard and more sophisticated and complex production line inspection equipment of different precision produced by this manufacturer.

Gallery

Semi-automatic box making machines

Box forming is the first stage in the process of secondary packing. Machines for box forming or folding produce boxes from pre-cut blanks. This can be carried out without the operator – in automated mode, or with operator’s help – in semi-automated mode.

Gallery

Box washing equipment

Those compact machines are used to wash boxes and pallets of various types, sizes and soil levels. Powerful washing and drying systems ensure the optimum hygiene level required for your production process.

Gallery

Automatic box making machines

Boxes can be sealed in two ways:

in automated mode – the upper flaps of the box are folded down automatically, the machine adjusts itself to the box size and reliably seals/glues the box;
in semi-automated mode, where the operator folds down the flaps and pushes the box into the machine.

Gallery

Equipment for packing into heat shrink film

These machines are divided into the following groups:

Machines for corner welding: used for packing separate products or their groups, they offer low or medium output;
Machines for welding transverse seams only: automatically form the group of products, cover it with the film, the conveyor transports the package through the hot-air tunnel, the film shrinks and closely encrusts the products.

Gallery

Lifting tables

Scissor lifts are produced using high-quality components in order to ensure reliability, long life cycle and safety at work.

Gallery

Free-rolling roller conveyors

Free-rolling roller conveyors can be used in logistics for easy and convenient transportation of certain loads. Conveyors can be:

linear fixed-length;
variable-length ;
conveyors with turn.

Gallery

Metal detectors

The purpose of metal detectors is to detect and remove products with metal impurities from production or packing processes. They enable to detect all types of metal in products or raw materials.

Gallery

Motorized conveyors

We offer a wide range of motorized conveyors:

Conveyors of plate-type chains and their assemblies;
Roller conveyor;
PVC-band conveyors;
Modular band conveyors.

Gallery

Equipment for packing in modified atmosphere

Modified Atmosphere Packaging (MAP) is the best way to preserve the freshness of a product longer without sacrificing the attractiveness of the traditional package. When packing in compliance with this system, the atmosphere around the product in the package is replaced. This enables to control chemical, ferment-type or microbiological reactions and reduce or completely stop the main product decomposition processes.

Gallery

Machines for horizontal packing and bottling

Machines for horizontal packing ensure high production output and high-quality and airtight packing, which protects the product against atmospheric influence. Usually, machines are used for packing of various food products (cheese, biscuits, confectionery, meat products, etc.), stationery, cosmetics, pharmacy products, etc.

Machines for horizontal packing and bottling are used to pack various products (spices, confectionery products, liquids, etc.) into doy-pack bags. Equipment of this type can also be easily integrated with various types of batchers.

Gallery