Precision gears

Back

SaveSaved
Save

Ask a question

We offer precision gears by a leading and highly experienced manufacturer of reducers Apex Dynamics.

For more useful information, see the following catalogues:

Contact us by phone +370 5 205 2881 or e-mail email detales@pakmarkas.lt and we will provide you with more information and advise you on the gears by this manufacturer.

Related products

prev

Sensors

We offer inductive, photoelectric, capacitive and ultrasonic sensors, temperature controllers, cameras, safety light curtains, and encoders by leading and highly experienced sensor manufacturers Datalogic and Pepperl-Fuchs.

For more useful information, see:

Industrial and transport beacons

We offer industrial and transport beacons by a leading and highly experienced beacon manufacturer Delta Design.

For more useful information, see the Bacons catalogue.

Mini series reducers

DC motors

Micro series vibratory motors

Angular gearboxes and screw jacks

We offer angular gearboxes, screw jacks and screws by leading and highly experienced manufacturers of reducers.

Need a consultation?

Write or call us now.

Low-centre electric motors

We offer low-centre electric motors by leading and highly experienced manufacturers of electric motors CEG,Himmel ir Teknomotor.

We offer a wide range of standard low-centre electric motors:

  • size range from 48 to 112;
  • power from 0.37 kW to 50 kW;
  • rotation speed (number of poles) 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles); we can also offer low-centre motors with the rotation speed of up to 24,000 rpm;
  • protection rating IP55 or higher;
  • aluminium or cast iron housing;
  • insulation class F.
  • single-phase or three-phase, also motors with AC or DC brakes are available.

Nichrome wire and strip

We offer nichrome wire and strip by a leading and highly experienced nichrome manufacturer Kanthal.

Nichrome characteristics:

  • operating temperature of up to 1400°C;
  • nichrome wire diameter from 0.1 mm to 12 mm;
  • nichrome strip thickness from 0.1 mm to 0.8 mm and width from 0.1 mm to 10 mm.
next