Conveyor bearings

Back

SaveSaved
Save

Ask a question

Movex bearing housings are made of reinforced polyamide, which enables them to have a higher bearing capacity and good resistance to chemical substances, water, oil, petroleum and alcohol drinks. Any bearing can be used from 0–80°C. The ball bearings are made of chrome steel; they can also be made of stainless steel on request. We also offer bearing housings made of stainless steel – this is the best solution for food and pharmacy products.

  • Open (plastic housing)
  • Closed (metal housing)
  • Open (plastic housing)
  • Closed (metal housing)

Contact us by phone +370 685 680 97  or e-mail us at valerij.soloducha@pakmarkas.lt now and we will advise you and help you choose the most suitable option.

Related products

prev

Nichrome wire and strip

We offer nichrome wire and strip by a leading and highly experienced nichrome manufacturer.

Nichrome characteristics:

  • operating temperature of up to 1400°C;
  • nichrome wire diameter from 0.1 mm to 12 mm;
  • nichrome strip thickness from 0.1 mm to 0.8 mm and width from 0.1 mm to 10 mm.

Shaft-mounted gear reducers

We offer pendular-gear speed reducers by a leading and highly experienced manufacturer of reducers .

We adjust products according to your activities and requirements in order to ensure that you achieve the required output.

For more information, see the Catalogue of reducers.

Parallel shafts

Helical

Variators

PTFE fabrics and curtains

We offer heat-resistant PTFE and PTFE products by a leading and highly experienced PTFE manufacturer. 

PTFE characteristics:

  • temperature from -80°C to +260°C;
  • self-adhesive or non self-adhesive;
  • thickness from 0.08 mm to 0.53 mm;
  • wide range of widths;
  • extremely resistant to chemical exposure, resistant to mechanical impact, well-sliding, flexible, electricity insulator, easy cleaning, non-toxic.

Low-centre electric motors

We offer low-centre electric motors by leading and highly experienced manufacturers of electric motors.

We offer a wide range of standard low-centre electric motors:

  • size range from 48 to 112;
  • power from 0.37 kW to 50 kW;
  • rotation speed (number of poles) 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles); we can also offer low-centre motors with the rotation speed of up to 24,000 rpm;
  • protection rating IP55 or higher;
  • aluminium or cast iron housing;
  • insulation class F.
  • single-phase or three-phase, also motors with AC or DC brakes are available.

Drum motors

We offer electric drum motors by leading and highly experienced manufacturers of electric motors Interroll and Himmel. These are solutions for food industry, airports, malls, logistics warehouses, etc.

We offer a wide range of standard electric drum motors:

  • size range from 60 to 800;
  • power from 0.03 kW to 132 kW;
  • belt speed from 0.05 m/s to 4.5 m/s;
  • protection rating IP66;
  • stainless steel housing.

next