Bandall labels

Gallery

As opposed to banding self-adhesive labels, these bandall labels are not affixed to the product using adhesive, but are wrapped around it tightly and thermally fused at a precise place.

Such labelling is suitable for manufacturers who are looking for cost-efficient non-standard solutions.

Banding labels are used for the banding of both small and large products: from precisely packaged pills to cardboard boxes or other items. In addition, they can be used to band promoted products together and/or as a protection for items during the transportation.

Manufacturers can be sure that two, four, six, or even more banded products will remain safely bundled during the entire transportation process and that packages will reach the shelves undamaged and intact.

Contact us by phone +370 650 863 90 or e-mail us at miroslav.brazulevic@pakmarkas.lt and we will be happy to discuss which labels are the most suitable specifically for your product.

Related products

BA-type reducers

We offer helical bevel gear reducers with aluminium housing by leading and highly experienced manufacturers of reducers Motovario Group and SIEMENS.

We offer a wide range of standard helical bevel gear reducers with aluminium housing:

power: up to 5.5 kW;
ratio from 7.62 to 442.76;
torque: max 450 Nm;
housing: aluminium;

Shrink sleeve for conical cups

A simple self-adhesive label cannot be evenly affixed to a conventional cone shaped container. Therefore, we have developed a technology that enables covering the inner surface of a label with a special glue so that the label would not slip off the container.

Top lidding packages

This type of packaging is produced by sealing the top film on the container. Packages may be tightly sealed, easily removed or re-sealable.

Different materials are used for different purposes, e.g. PP, PE, PA, PET, cardboard, aluminium, etc. Films can be transparent, white, metallised, withstanding pasteurisation or sterilisation.

Sachets

These are pouch-type packages. They are shaped by sealing on three or four sides.

Packages of this type are widely used for grocery products, cosmetics, frozen or dried food products.

Blank self-adhesive labels

Wide range of blank labels

Blank self-adhesive labels are produced for label printers or scales with built-in printers.

We offer blank labels of various forms and colours, made of paper or film. We also can produce unique blank labels specifically for your product: choose individualised materials, sizes, rolls, adhesive qualities, and colours.

NMRV and NMRV-Power reducers

We offer worm gear reducers by a leading and highly experienced manufacturer of reducers Motovario Group.

We offer a wide range of standard worm gear reducers:

size: NMRV 025-030-040-050-130-150;
size: NMRV-Power063-075-090-110;
power: up to 18.5 kW;
ratio from 5 to 100;
torque: max 1550 Nm;
housing: up to size 110 – aluminium, from size 130 – cast iron;
available combination options: NMRV + NMRV, NMRV-Power+ NMRV, NRV + NMRV, NRV-Power + NMRV, HA31 + NMRV, HW/NMRV-Power, IHW/NMRV-Power.

Electric and pneumatic vibratory motors

We offer electric and pneumatic vibratory motors by a leading and highly experienced manufacturer of electric motors Italvibras.

We offer a wide range of standard vibratory motors:

size range from 00 to 120;
power (centrifugal force) from 4 kg to 30,560 kg;
rotation speed (number of poles) 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles), 750 rpm (8 poles);
voltage supply from 24 V to 690 V;
protection rating IP66;
all motors have II 2 D or higher ATEX protection;
aluminium, cats iron, or stainless steel housing;
insulation class F.

Monochrome labels

We also offer monochrome labels printed by means of thermal transfer. This is a quick and cost-efficient solution for those who require small quantities of stickers of various types.