Wash-off labels

Back

SaveSaved
Save

Ask a question

Wash-off labels are transparent sticky labels that may be attached to any deposit return glass bottles (beer, soft drinks, etc.).

Advantages of wash-off labels:

  • Attractive exclusive design

An important characteristic of the label is its transparency. The label may be designed so that the text appears to be written directly on the bottle and margins of the label may be proficiently hidden.

  • Easily washed off

By using 1–2% soda solution one may easily wash off the label glue from the bottle at 65–80°C temperature.  It does not matter how long the label remained attached to a bottle (a month or a year) – the wash off feature of a glue is preserved for a long time.

  • Resistant

Wash-off labels must be pasted on dry bottles. Immediately after the application, the label becomes resistant to room temperature water and weeping, UV light, as well as temperature fluctuations.

  • May be used in normal washing conditions

Wash-off labels do not clog washing machines. They do not tend to wind up or shrink significantly. The tests proved that as little as 10 labels remained on bottles after washing 20,000 bottles in a KRONE type washing machine. All other labels were successfully removed.

  • Environmentally friendly

After removing a label, the glue and paint remain on the label. Therefore, it does not pollute water used for washing.

Along with transparent adhesive wash-off labels, we manufacture matte and glossy paper labels and polypropylene labels with wash-off glue that are used for the marking of deposit return bottles.

Contact us by phone +370 650 863 90 or e-mail us at miroslav.brazulevic@pakmarkas.lt if you have any additional questions or requests.

Related products

prev

Flow-pack packaging

Products are packaged by forming one longitudinal and two transverse welds.

To do this, we use horizontal and vertical packaging equipment. Packages are used in food, household chemical products, cosmetics, medicine and many other industries.

Monochrome labels

We also offer monochrome labels printed by means of thermal transfer. This is a quick and cost-efficient solution for those who require small quantities of stickers of various types.

Bandall labels

As opposed to banding self-adhesive labels, these bandall labels are not affixed to the product using adhesive, but are wrapped around it tightly and thermally fused at a precise place.

Such labelling is suitable for manufacturers who are looking for cost-efficient non-standard solutions.

NMRV and NMRV-Power reducers

We offer worm gear reducers by a leading and highly experienced manufacturer of reducers Motovario Group.

We offer a wide range of standard worm gear reducers:

  • size: NMRV 025-030-040-050-130-150;
  • size: NMRV-Power063-075-090-110;
  • power: up to 18.5 kW;
  • ratio from 5 to 100;
  • torque: max 1550 Nm;
  • housing: up to size 110 – aluminium, from size 130 – cast iron;
  • available combination options: NMRV + NMRV, NMRV-Power+ NMRV, NRV + NMRV, NRV-Power + NMRV, HA31 + NMRV, HW/NMRV-Power, IHW/NMRV-Power.

Full-body shrink sleeve

Shrink sleeves are a unique measure for strengthening your brand.

Shrink sleeves are scratch-resistant since the print is located on the inner side of the film. Therefore, there is a very slim possibility of damage to the label. It is a great choice for advertising campaigns since as much as 360° of bottle area can be used for any additional information and design solutions.

Ink ribbons

We offer a wide range of ink ribbons with various characteristics suitable for most thermal transfer printers.

We have tried majority of the most popular ink ribbons by all the largest manufacturers and made a thorough selection of the best types of them. We never replace them with substitute products. Therefore, we can guarantee that you will always receive only high-quality materials.

Top lidding packages

This type of packaging is produced by sealing the top film on the container.  Packages may be tightly sealed, easily removed or re-sealable.

Different materials are used for different purposes, e.g. PP, PE, PA, PET, cardboard, aluminium, etc. Films can be transparent, white, metallised, withstanding pasteurisation or sterilisation.

BA-type reducers

We offer helical bevel gear reducers with aluminium housing by leading and highly experienced manufacturers of reducers Motovario Group and SIEMENS.

We offer a wide range of standard helical bevel gear reducers with aluminium housing:

  • power: up to 5.5 kW;
  • ratio from 7.62 to 442.76;
  • torque: max 450 Nm;
  • housing: aluminium;
next