Electric motors for explosive environments

Back

SaveSaved
Save

Ask a question

We offer electric motors for explosive environments (ATEX) by leading and highly experienced manufacturers of electric motors Cantoni Group, Siemens and Euromotori.

We offer a wide range of standard electric motors for explosive environments (ATEX):

  • size range from 56 to 355;
  • power from 0.06 kW to 315 kW;
  • rotation speed (number of poles) 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles);
  • protection systems EEx II 2GD, EEx II 3GD;
  • aluminium or cast iron housing;
  • insulation class F.

–––

These motors (EEx) are suitable for operation in the environment containing gases, explosive or flammable vapours, or dust.

For more useful information, see:

Contact us now and we will provide you more information on these products.

Related products

prev
Standard single-phase motors

We offer single-phase electric motors by leading and highly experienced manufacturers of electric motors Cantoni Group and Simotop Group.

We offer a wide range of standard single-phase electric motors:

  • size range from 56 to 100;
  • power from 0.06 kW to 3 kW;
  • rotation speed (number of poles) 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles);
  • protection rating IP55 or higher;
  • aluminium housing;
  • insulation class F.
Electric motors with brakes

We offer electric motors with brakes by manufacturers Cantoni and Siemens:

  • size range from 56 to 355;
  • power from 0.06 kW to 315 kW;
  • brake types: very high or high braking torque AC brake, high or low braking torque DC brake;
  • standard brake voltage 230/400 V – 50 Hz;
  • braking surface: one or two discs;
  • rotation speed 3000 rpm (2 poles), 1500 rpm (4 poles), 1000 rpm (6 poles);
  • protection rating IP55 or higher;
  • aluminium or cast iron housing;
  • insulation class F.
Shrink sleeve for conical cups

A simple self-adhesive label cannot be evenly affixed to a conventional cone shaped container. Therefore, we have developed a technology that enables covering the inner surface of a label with a special glue so that the label would not slip off the container.

Full-body shrink sleeve

Shrink sleeves are a unique measure for strengthening your brand.

Shrink sleeves are scratch-resistant since the print is located on the inner side of the film. Therefore, there is a very slim possibility of damage to the label. It is a great choice for advertising campaigns since as much as 360° of bottle area can be used for any additional information and design solutions.

Blank self-adhesive labels

Wide range of blank labels

Blank self-adhesive labels are produced for label printers or scales with built-in printers.

We offer blank labels of various forms and colours, made of paper or film. We also can produce unique blank labels specifically for your product: choose individualised materials, sizes, rolls, adhesive qualities, and colours.

Ink ribbons

We offer a wide range of ink ribbons with various characteristics suitable for most thermal transfer printers.

We have tried majority of the most popular ink ribbons by all the largest manufacturers and made a thorough selection of the best types of them. We never replace them with substitute products. Therefore, we can guarantee that you will always receive only high-quality materials.

CAB and CARL VALENTIN printers

Printers produced by CAB and CARL VALENTIN can be used with large ink ribbons and blank self-adhesive label rolls.

These printers can be used both in the office and manufacturing premises. The useful life is at least 5 years.

Limit switches

We offer limit switches, foot switches, pushbuttons, safety devices and modules by a leading and highly experienced manufacturer of limit switches Pizzato Elettrica.

next